Minimum Theremin Kit Contents
(Back to "Technical
Information")
| Quantity | Description |
1 |
Blank Circuit Board, type 100-PCB |
1 |
Set of Parts for the Blank Circuit Board (See details below) |
1 |
On-Off Switch w/ Mounting Hardware |
1 |
9V Battery |
1 |
Battery Connector |
1 |
1/4" Mono Audio Output Jack w/ Mounting Hardware |
1 |
Pitch Zero Control Potentiometer w/ Mounting Hardware |
1 |
Knob for Pitch Zero Control Potentiometer |
1 |
1/16" Allen Key for Knob |
1 |
Hookup Wire (5 Feet) |
1 |
Set of Standoffs and Screws for Mounting Circuit Board (See details below) |
Set of Parts for the Blank Circuit Board
| Quantity | Description |
6 |
Resistor, 270,000 Ohm |
3 |
Resistor, 27,000 Ohm |
3 |
Resistor, 22,000 Ohm |
1 |
Resistor, 100 Ohm |
1 |
Resistor, 470 Ohm |
2 |
Capacitor, 100 Picofarad |
2 |
Capacitor, 0.01 Microfarad |
1 |
Capacitor, 0.1 Microfarad |
4 |
Capacitor, 10 Microfarad |
1 |
Rectifier, type 1N4004 |
2 |
Integrated Circuit, type CD4069UBE |
1 |
Voltage Regulator, type LP2950ACZ-5.0 |
1 |
Trimmer Potentiometer, type 3006P-1-103 |
Set of Standoffs and Screws
for Mounting Circuit Board
| Quantity | Description |
4 |
3/4" Long, 4-40 Thread, Male-Female Standoff |
4 |
3/4" Long, 4-40 Thread, Female Standoff |
8 |
5/16" Long, 4-40 Thread, Machine Screw |
(top)